Current location:Home >Product Center>PH-M480(Full Automatic)
Product Center

PH-M480(Full Automatic)


PH-M480(Full Automatic)

The 32 socket write-in full automatic programming system which carries two high-speed gang programmers MODEL408PH.


  • High speed Gang programmer 48sets of "MODEL408PH"(8sockets ×4sites total 32pcs) auto programming system.
  • PH-M480 with MODEL408PH is operated by panel operation easily.
  • Main target is high density devices (higher programming time 90seconds)・NAND・eMMC, and Flash memory.
    Adjusting JIG is not needed to change socket adapter.
  • 4sets of programmers with auto handler make it possible to high throughput for programming. Multiple programmers create high production capacity not depending on programming time.


Programmer MODEL408PH ×4sets
USB I/F    USB2.0
Buffer memory  Standard 256Gbit
Target devices eMMC・eSD・GB-NAND・MoviNAND・i-NAND・NAND・OneNAND・Flash Micro controller・NOR・etc
Log file .txt format for each lot
Socket Open top
Carrying mechanism X,Y,Z,θ axes use highly accurate stepper motors and timing belt drivers.
X,Y resolution: 4μm/pulse
Z resolution: 4μm/pulse
θresolution: 0.18°/pulse
Configuration BASE model PH-M480 is configured manually.
X-Y,θ is trained using a remote teach original and provided JIG
Z Coordinate :Auto teaching
Vision assisted teaching software is available.
UPH 1000[UPH] UPH=Unit per Hour
Display inspection Device position is corrected by CCD camera
Interface Tray:JEDEC(Size :315.8mm×135.8mm for Auto handler *it is neccessary for Tray “Center Vacuum Pickup Site”)/EIAJ Input 20 pieces、Output 20 pieces
Marking(Optional) Shachihata TAT Ink
Dot marking、Character marking
Control OS FA PC OS: Windows XP ServicePack3
User interface Color LCD Panel, Key board, Touch panel
Network Ethernet
Time to exchange socket adapter Lower 300 seconds(Data transfer time is not included)
Air 0.4Mpa-0.5Mpa 50l/min ※Clean dry air only
Power Supply ACIN :AC100V/ AC220V 50/60Hz 200VA
Size Weight (D)900x(W)1350x(H)1500(mm) 450Kg
※LCD display is not included.