CH
- Automatic Programmer
- PH-M100(Full Automatic)
- PH-MReel(Full Automatic)
- PH-M880(Full Automatic)
- PH-M480(Full Automatic)
- Manual Programmer
- ELNEC—Beeprog2
- ELNEC—Beeprog3
- ELNEC—BeeHive304
- ELNEC—BeeHive204
- ELNEC—Beeprog2C
- ELNEC-BeeHive208S
- ELNEC-BeeHive204AP
- ELNEC-BeeProg2AP
- MODEL516
- MODEL400(M404/408/416)
- PT-100
- AP8000
- Copy Machine
- PCIe SSD Private copying machine
- TF/SD Classification testing machine
- USBClassification testing machine
- Digital movie hard drive copying machine
- Support IC
- ELNEC Supported IC
- Adapters
- ELNEC Adapters
- Acroview Adapters
- Carrier
PH-M100(Full Automatic)
General
-
PH-M100(Full Automatic)
The 16 socket write-in full automatic programming system which carries two high-speed gang programmers MODEL408PH.
Features
- 80x9组独立精密引脚驱动电路，可并行编程，最多可同时烧录4Pce
- 可灵活选择RJ45网络接口或USB接口
- 可灵活选择联机或脱机（SD卡）工作模式
- 可灵活选择验证模式或量产模式
- 先进精密的引脚驱动技术，可提供高速、稳定精准的信号
- 带宽最快可超过1.6Gb/Sec，支持IC允许的最大速度进行编程
Specification
| Programmer | |
|---|---|
| USB I/F | USB2.0 |
| Buffer memory | Standard 256Gbit |
| Target devices | eMMC・eSD・GB-NAND・MoviNAND・i-NAND・NAND・OneNAND・Flash集成微控制器・NOR・etc |
| Log file | Text-format for each lot. |
|
Handler |
|
|---|---|
| Package | TSOP・SOP・BGA・QFP |
| Socket | Open top |
| Carrying mechanism |
X,Y,Z,θ axes use highly accurate steeper motors and timing belt drives. X,Y resolution : 6μm/pulse Z resolution : 30μm/pulse θ resolution : 0.18°/pulse |
| UPH |
900[UPH] (UPH:Unit per Hour) |
| Configuration |
Base model PH-M100 is configured manually
X-Y,θ is trained using a remote teach original and provided JIG. |
| Display inspection | Device position is corrected by CCD camera |
| Interface |
Tray(standard)/Tube(Option ・under development)/Tape(Option・under development) JEDEC tray (Size : 315.8mm×135.8mm *it is neccessary for Tray “Center Vacuum Pickup Site”) Input 20 pieces, Output 20 pieces |
| Marking(Optional) |
Shachihata TAT Ink Dot marking, Character marking |
| Control OS | Windows(R) 7 |
| User interface | Color LCD Panel, Key board, Touch panel(option) |
| Network | Ethernet |
| Work switchover time | 10 minutes or less |
| Air | 0.4Mpa-0.5Mpa 50l/min ※Clean & dry air |
| Power Supply | ACIN :AC100V/ AC220V 50/60Hz 200VA |
| Size |
(D)1000x(W)965x(H)1500(mm) ※LCD display not included |
Recommend
ELNEC Supported IC
Carrier
Acroview Adapters
ELNEC Adapters
AP8000
Digital movie hard drive copying machine
USBClassification testing machine
TF/SD Classification testing machine
PCIe SSD Private copying machine
ELNEC-BeeProg2AP
ELNEC-BeeHive204AP
ELNEC-BeeHive208S
PH-MReel(Full Automatic)
PH-M880(Full Automatic)
PH-M480(Full Automatic)
PT-100
MODEL400(M404/408/416)
ELNEC—Beeprog2C
ELNEC—BeeHive204
ELNEC—BeeHive304
ELNEC—Beeprog3
ELNEC—Beeprog2
PH-M100(Full Automatic)
MODEL516
